NG-2 7S PICKUP
Features
Onboard volume control
Players can control their output signal while onstage or in the studio, right from the pickup-mounted volume knob.
Wood case
The piezo element is encased in elegant and stylish mahogany. The lightweight assembly offers maximum tonal sensitivity.
Complete set
Two cables are included — one 9-ft. 1/8" to 1/4" and one 3-ft. 1/8" to female 1/4" jumper with safety clip to connect with your instrument cable.
Instructions
Follow our installation guide through the following steps:
Video Review
Specifications
Specifications | |||||
Weight | 5g. / 0.176oz | ||||
Wood | Mahogany | ||||
Maximum Impedance | 500 Ω | ||||
Cables | |||||
Jumper cable with safety clip | 1meter / 3' | ||||
Amp cable | 3meter / 9' | ||||
Measurements | |||||
Specified part | Letter | Size in MM (from*) | Size in MM (to*) | Size in INCH (from*) | Size in INCH (to*) |
Transducer length | a | 88,6 | 88,8 | 3,488 | 3,496 |
Jack housing length | b | 32,5 | 32,6 | 1,280 | 1,283 |
Total pickup length | c | 121,2 | 121,3 | 4,772 | 4,776 |
Transducer width | d | 9,3 | 9,4 | 0,366 | 0,370 |
Jack housing width | e | 19,1 | 19,2 | 0,752 | 0,756 |
Active signal transfer area length | f | 85,0 | - | 3,346 | - |
Transducer thickness | g | 2,1 | 2,2 | 0,083 | 0,087 |
Jack housing height without potentiometer | h | 10,7 | 10,8 | 0,421 | 0,425 |
Jack housing height with potentiometer | i | 16,3 | 16,4 | 0,642 | 0,646 |
*Our handmade pickups may vary slightly in size due to the nature of the building |